Dual Mosfet Controller Fan / Motor Driver Board for BTT SKR 1.3 1.4 1.4T & Other

Here we have a mosfet driver board for the control of cooling fans / motors.

On most controllers this is plug and play with no soldering required.

If you have a BTT SKR you will likely know that the firmware provides functions to control fans in the hotend and controller/stepper driver cooling.

You will also know the only option is to use the 2nd hotend port to give you ONE fan control (Now you need to choose which fan can be turned off).

This is quite pointless when looking to save electric and enjoy quiet whilst keeping your printer powered on.

With our driver board you retain the option to keep the 2nd hotend for future use whilst gaining an extra TWO fan outputs.

Now once the hotend is cool the hotend fan will turn off and once the drivers are no longer in use the controller fan can be turned off all automatically leaving you with a printer you would never know was actually turned on :)

This driver board plugs into the 12/24v fan permanent power to take its power. It then has 2 PWM safe inputs to control the fan/motor outputs.

We run the SKR 1.4T and chose to use the probe and servo ports since we run our own capacitive probes on the Z-endstop.

There's nothing stopping you from using other ports.

If you let us know when ordering what connectors are required we will supply what you need :)

This board will provide more than enough power for even the most power hungry cooling fans.

**Firmware edits/modifications to allow these functions are required but if you've setup the SKR from scratch with marlin 2.0 then the edits are very easy and its just a case of choosing the correct pin numbers and enabling options. We can help with this**

This driver board will work with any controller that outputs 3.3-5v logic and will control any load of upto 30v @ 60a (extra cooling may be required if running at the limit)

Any questions please ask before purchasing :)

Includes:

1x Dual Mosfet Driver Board complete with wiring as pictured.