G3D Print Fix Adhesion Aid - 100ml REFILL For Heated Glass 3D Printer Beds

Used to aid print adhesion when printing plastics. We use this for small ABS prints and all our PLA & PETG prints. When used with our glass printing plates adhesion is no longer a problem.

Print fix is water based and easily cleaned with a damp towel between applications. Always be sure to allow your print to cool before attempting removal. Failure to do this can damage the glass surface. Once cooled your print should come away with little to no effort. Any residue left on the printed part can be wiped or washed off.

If you're printing with a 3D printer you probably know how frustrating it is to get the perfect first layer, every time, and then have it stick.

After trying the majority of adhesion options out there we stumbled upon this mix that has reduced our failed prints to nearly zero. We now use this on all our printers.

Whilst this can be used from the bottle, we highly recommend using a spray for easy application and even coverage.

Being water based with no solvents or aerosols, its good for your pocket and also for the environment.

Included Is:
1x 100ml Refill Bottle